Today, on this 1250 model Metal Press, the effect of pressing is tested. The experimental material is the broken aluminm cans. This machine can make two briquettes in one mold, and the finished product diameter is 40mm.
The Hydraulic Briquetting Machine has two structures: vertical and horizontal. Among them, the vertical product is equipped with or without a feeding tube. The diameter of the briquette can be designed within the specified range according to user needs. If there is no special requirement, presses below 200 tons adopt welded frame structure. The pressing forces range from 200 to 315 tons and are available in welded frame or four-column designs. The pressing force for products above 500 tons uses 4 columns.
Our Metal Briquetting Press can be designed for manual operation, single shot automatic operation or continuous automatic operation. Users can freely choose PLC system to control automatic operation according to their needs.Under the control of PLC,this chip briquetting press pricesses strong anti-interfernece capacity,high level of automation and ease of operation.
