Today,a set of briquetting machine has been delivered.
Our Metal Chips Briguetting Machine is mainly used for the processing of various waste metal briquettes, reducing the occupied space of loose waste metals and facilitating later transportation and recycling in the furnace.
Cutting chips, turning chips, milling chips and other wastes generated in the metal processing process can be directly remelted as furnace charge and refined into metal raw materials after compressed into high-density cake pieces through the Hydraulic Briquetting Machine.
Take iron and steel chips as an example, every 1 ton of recycled iron and steel chips can save about 1.2 tons of iron ore and 0.5 tons of coke, which significantly reduces the dependence on primary mineral resources and realizes the closed-loop cycle of “Waste - Recycled Raw Materials”.
Metal scraps are fluffy and take up a lot of space for direct transportation and storage. Crumb cake machine through high-pressure compression (such as hydraulic drive) will reduce the volume of waste materials to the original volume of 1/5-1/10, greatly reducing the number of transportation and storage area.
Take auto parts processing enterprises as an example, after using the Metal Briguette Machine, the cost of waste transportation can be reduced by 30%-50%, and the utilization rate of storage space can be increased by more than 80%.
